Tag Archives: Pro Vent

How’ve We Been Getting On With Our Catch Can?

09 Thursday May 2019

Posted by in Amarok, General, Maintenance, Modifications, tow vehicle, VW Amarok

≈ 2 Comments

Tags

, , , ,


Back in June 2018 I fitted a Man Hummel ProVent oil catch can to our Amarok. Since then I’ve had a few people asking me how we have been getting on with it and has it actually ‘caught’ anything.

If you haven’t a clue what I’m on about here’s a link to the original two posts…. Catch Me If You Can… and Catch Me If You Can Pt 2

shoppingI fitted the ProVent to our VW Amarok when it had done about 8000 miles (12,800Km) and we have now done just over 13,000 miles (21,000Km) a great deal of it towing. I opted initially to drain the ProVent every 600 Miles (1000Km) and the first three each time I got about half a cup of slightly oily water. It was clear like water but when rubbed between your fingers it felt ‘slippy’ a bit like baby oil. I did notice that one of the trainings that covered two long tows up to the Lake District what came out was slightly darker, still about the same quantity though. However I did notice on the last draining I had more of a dark oil content as a separate layer in the lighter clear ‘oily water’. Watching the video below I did find out that this is normal. The filter that is in the ProVent takes a few hundred Km to start working properly, first catching the condensate and then once the filter is saturated does it start to catch and drain the heavy oil.

I did recently remove the hoses on the intercooler (inlet and outlet) just out of curiosity and the interior from what I could see was still clean, with only a light covering deposited from the first 8000 miles (13,000Km) of running without a catch can fitted.

So how much have I got out?

Well in the first 5000 miles (8000Km) I have now filled an old 500ml  2 stroke oil container and just started on my second. I’ll continue to drain at the 600 mile mark. Although I must admit I now drain it before a long towing trip and again when I return home. It only takes about a minute and doesn’t require any tools so really is one of those tasks that is easily accomplished with the minimal of effort. Hopefully this will keep our engine in tip-top condition and not start to suffer from the oily carbon build up that saps power and is prevalent in all diesel engines.

4WDaction-logo-1Here’s an excellent video from the guy’s at 4WD Action with probably the best explanation I’ve seen so far on the net… (Video (c) 4WDAction.AU)